Tizen Native API
Connection Profile

The Connection Profile API provides functions for managing the connection profile.

Required Header

#include <net_connection.h>

Overview

The Connection Profile provides functions for mapping connection profile. It allows you to use a handle for dealing with a connection profile. You can get details about connection using ‘connection_profile_h’ handle.

Related Features

This API is related with the following features:

Functions

int connection_profile_create (connection_profile_type_e type, const char *keyword, connection_profile_h *profile)
 Creates a profile handle.
int connection_profile_destroy (connection_profile_h profile)
 Destroys a profile handle.
int connection_profile_clone (connection_profile_h *cloned_profile, connection_profile_h origin_profile)
 Clones a profile handle.
int connection_profile_get_id (connection_profile_h profile, char **profile_id)
 Gets the profile ID.
int connection_profile_get_name (connection_profile_h profile, char **profile_name)
 Gets the profile name.
int connection_profile_get_type (connection_profile_h profile, connection_profile_type_e *type)
 Gets the network type.
int connection_profile_get_network_interface_name (connection_profile_h profile, char **interface_name)
 Gets the name of the network interface, e.g. eth0 and pdp0.
int connection_profile_refresh (connection_profile_h profile)
 Refreshes the profile information.
int connection_profile_get_state (connection_profile_h profile, connection_profile_state_e *state)
 Gets the network type.
int connection_profile_get_ip_config_type (connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e *type)
 Gets the IP config type.
int connection_profile_get_ip_address (connection_profile_h profile, connection_address_family_e address_family, char **ip_address)
 Gets the IP address.
int connection_profile_get_subnet_mask (connection_profile_h profile, connection_address_family_e address_family, char **subnet_mask)
 Gets the Subnet Mask.
int connection_profile_get_gateway_address (connection_profile_h profile, connection_address_family_e address_family, char **gateway_address)
 Gets the Gateway address.
int connection_profile_get_dhcp_server_address (connection_profile_h profile, connection_address_family_e address_family, char **dhcp_server)
 Gets the DHCP Server address.
int connection_profile_get_dhcp_lease_duration (connection_profile_h profile, connection_address_family_e address_family, int *dhcp_lease_duration)
 Gets the DHCP lease duration.
int connection_profile_get_dns_address (connection_profile_h profile, int order, connection_address_family_e address_family, char **dns_address)
 Gets the DNS address.
int connection_profile_get_proxy_type (connection_profile_h profile, connection_proxy_type_e *type)
 Gets the Proxy type.
int connection_profile_get_proxy_address (connection_profile_h profile, connection_address_family_e address_family, char **proxy_address)
 Gets the Proxy address.
int connection_profile_set_ip_config_type (connection_profile_h profile, connection_address_family_e address_family, connection_ip_config_type_e type)
 Sets the IP config type.
int connection_profile_set_ip_address (connection_profile_h profile, connection_address_family_e address_family, const char *ip_address)
 Sets the IP address.
int connection_profile_set_subnet_mask (connection_profile_h profile, connection_address_family_e address_family, const char *subnet_mask)
 Sets the Subnet Mask.
int connection_profile_set_gateway_address (connection_profile_h profile, connection_address_family_e address_family, const char *gateway_address)
 Sets the Gateway address.
int connection_profile_set_dns_address (connection_profile_h profile, int order, connection_address_family_e address_family, const char *dns_address)
 Sets the DNS address.
int connection_profile_set_proxy_type (connection_profile_h profile, connection_proxy_type_e type)
 Sets the Proxy type.
int connection_profile_set_proxy_address (connection_profile_h profile, connection_address_family_e address_family, const char *proxy_address)
 Sets the Proxy address.
int connection_profile_set_state_changed_cb (connection_profile_h profile, connection_profile_state_changed_cb callback, void *user_data)
 Registers the callback that is called when the state of profile is changed.
int connection_profile_unset_state_changed_cb (connection_profile_h profile)
 Unregisters the callback that is called when the state of profile is changed.
int connection_profile_get_ipv6_state (connection_profile_h profile, connection_profile_state_e *state)
 Gets the IPv6 network state.
int connection_profile_set_dns_config_type (connection_profile_h profile, connection_address_family_e address_family, connection_dns_config_type_e type)
 Sets the DNS config type.
int connection_profile_get_dns_config_type (connection_profile_h profile, connection_address_family_e address_family, connection_dns_config_type_e *type)
 Gets the DNS config type.
int connection_profile_get_prefix_length (connection_profile_h profile, connection_address_family_e address_family, int *prefix_len)
 Gets the network prefix length.
int connection_profile_set_prefix_length (connection_profile_h profile, connection_address_family_e address_family, int prefix_len)
 Sets the network prefix length.

Typedefs

typedef void * connection_profile_h
 The profile handle.
typedef void(* connection_profile_state_changed_cb )(connection_profile_state_e state, void *user_data)
 Called when the state of the profile is changed.

Typedef Documentation

typedef void* connection_profile_h

The profile handle.

Since :
2.3
typedef void(* connection_profile_state_changed_cb)(connection_profile_state_e state, void *user_data)

Called when the state of the profile is changed.

Since :
2.3
Parameters:
[in]stateThe state
[in]user_dataThe user data passed from the callback registration function
See also:
connection_profile_set_state_changed_cb()
connection_profile_unset_state_changed_cb()

Enumeration Type Documentation

Enumeration for address family.

Since :
2.3
Enumerator:
CONNECTION_ADDRESS_FAMILY_IPV4 

IPV4 Address type

CONNECTION_ADDRESS_FAMILY_IPV6 

IPV6 Address type

Enumeration for DNS configuration type.

Since :
4.0
Enumerator:
CONNECTION_DNS_CONFIG_TYPE_NONE 

Not defined

CONNECTION_DNS_CONFIG_TYPE_STATIC 

Manual DNS configuration

CONNECTION_DNS_CONFIG_TYPE_DYNAMIC 

Config DNS using DHCP client

Enumeration for IP configuration type.

Since :
2.3
Enumerator:
CONNECTION_IP_CONFIG_TYPE_NONE 

Not defined

CONNECTION_IP_CONFIG_TYPE_STATIC 

Manual IP configuration

CONNECTION_IP_CONFIG_TYPE_DYNAMIC 

Config IP using DHCP client

CONNECTION_IP_CONFIG_TYPE_AUTO 

Config IP from Auto IP pool (169.254/16). Later with DHCP client, if available

CONNECTION_IP_CONFIG_TYPE_FIXED 

Indicates an IP address that can not be modified

Enumeration for profile state type.

Since :
2.3
Enumerator:
CONNECTION_PROFILE_STATE_DISCONNECTED 

Disconnected state

CONNECTION_PROFILE_STATE_ASSOCIATION 

Association state

CONNECTION_PROFILE_STATE_CONFIGURATION 

Configuration state

CONNECTION_PROFILE_STATE_CONNECTED 

Connected state

Enumeration for network connection type.

Since :
2.3
Enumerator:
CONNECTION_PROFILE_TYPE_CELLULAR 

Cellular type

CONNECTION_PROFILE_TYPE_WIFI 

Wi-Fi type

CONNECTION_PROFILE_TYPE_ETHERNET 

Ethernet type

CONNECTION_PROFILE_TYPE_BT 

Bluetooth type

Enumeration for proxy method type.

Since :
2.3
Enumerator:
CONNECTION_PROXY_TYPE_DIRECT 

Direct connection

CONNECTION_PROXY_TYPE_AUTO 

Auto configuration (use PAC file). If URL property is not set, DHCP/WPAD auto-discover will be tried

CONNECTION_PROXY_TYPE_MANUAL 

Manual configuration


Function Documentation

int connection_profile_clone ( connection_profile_h cloned_profile,
connection_profile_h  origin_profile 
)

Clones a profile handle.

Since :
2.3
Remarks:
You must release cloned_profile using connection_profile_destroy().
Parameters:
[out]cloned_profileThe handle of the cloned profile
[in]origin_profileThe handle of the origin profile
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
See also:
connection_profile_destroy()
int connection_profile_create ( connection_profile_type_e  type,
const char *  keyword,
connection_profile_h profile 
)

Creates a profile handle.

The profile name, which you get from connection_profile_get_name() will include the keyword you set.

Since :
2.3
Privilege Level:
public
Privilege:
http://tizen.org/privilege/network.get
Remarks:
You must release profile using connection_profile_destroy().
Parameters:
[in]typeThe type of profile
CONNECTION_PROFILE_TYPE_CELLULAR and CONNECTION_PROFILE_TYPE_WIFI are supported
[in]keywordThe keyword included in profile name
[out]profileThe handle of the profile
Returns:
0 on success, otherwise negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_PERMISSION_DENIEDPermission denied
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
See also:
connection_profile_destroy()
connection_profile_get_name()

Destroys a profile handle.

Since :
2.3
Parameters:
[out]profileThe handle to the profile
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
See also:
connection_profile_create()
int connection_profile_get_dhcp_lease_duration ( connection_profile_h  profile,
connection_address_family_e  address_family,
int *  dhcp_lease_duration 
)

Gets the DHCP lease duration.

Since :
4.0
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]dhcp_lease_durationThe DHCP lease duration in seconds
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
int connection_profile_get_dhcp_server_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
char **  dhcp_server 
)

Gets the DHCP Server address.

Since :
4.0
Remarks:
You must release dhcp_server using free(). This function is supported only for IPv4 address family.
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]dhcp_serverThe DHCP Server address
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
int connection_profile_get_dns_address ( connection_profile_h  profile,
int  order,
connection_address_family_e  address_family,
char **  dns_address 
)

Gets the DNS address.

Since :
2.3
Remarks:
The allowance of the DNS address is 2. You must release dns_address using free().
Parameters:
[in]profileThe profile handle
[in]orderThe order of DNS address
It starts from 1, which means first DNS address
[in]address_familyThe address family
[out]dns_addressThe DNS address
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Gets the DNS config type.

Since :
4.0
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]typeThe DNS config type
Returns:
0 on success, otherwise negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
int connection_profile_get_gateway_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
char **  gateway_address 
)

Gets the Gateway address.

Since :
2.3
Remarks:
You must release gateway_address using free().
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]gateway_addressThe gateway address
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
int connection_profile_get_id ( connection_profile_h  profile,
char **  profile_id 
)

Gets the profile ID.

The separate profiles can have the same name. So, you must use this API instead of connection_profile_get_name() if you want to get the unique identification. In case you create a profile, this value will be determined when you add the profile.

Since :
2.3
Remarks:
You must release profile_id using free().
Parameters:
[in]profileThe profile handle
[out]profile_idThe ID of the profile
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
See also:
connection_profile_get_name()
connection_add_profile()
int connection_profile_get_ip_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
char **  ip_address 
)

Gets the IP address.

Since :
2.3
Remarks:
You must release ip_address using free().
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]ip_addressThe IP address
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Gets the IP config type.

Since :
2.3
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]typeThe type of the IP config
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Gets the IPv6 network state.

Since :
4.0
Parameters:
[in]profileThe profile handle
[out]stateThe profile state
Returns:
0 on success, otherwise negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
int connection_profile_get_name ( connection_profile_h  profile,
char **  profile_name 
)

Gets the profile name.

Since :
2.3
Remarks:
You must release profile_name using free().
Parameters:
[in]profileThe profile handle
[out]profile_nameThe name of the profile
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
See also:
connection_profile_get_id()
int connection_profile_get_network_interface_name ( connection_profile_h  profile,
char **  interface_name 
)

Gets the name of the network interface, e.g. eth0 and pdp0.

Since :
2.3
Remarks:
You must release interface_name using free().
Parameters:
[in]profileThe profile handle
[out]interface_nameThe name of the network interface
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
int connection_profile_get_prefix_length ( connection_profile_h  profile,
connection_address_family_e  address_family,
int *  prefix_len 
)

Gets the network prefix length.

Since :
4.0
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]prefix_lenThe network prefix length
In case of IPv4, it means netmask length (also called a prefix, e.g. 8, 16, 24, 32)
Returns:
0 on success, otherwise negative error value.
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
int connection_profile_get_proxy_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
char **  proxy_address 
)

Gets the Proxy address.

Since :
2.3
Remarks:
You must release proxy_address using free().
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]proxy_addressThe proxy address
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Gets the Proxy type.

Since :
2.3
Parameters:
[in]profileThe profile handle
[out]typeThe type of the proxy
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Gets the network type.

Since :
2.3
Parameters:
[in]profileThe profile handle
[out]stateThe state of the profile
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
int connection_profile_get_subnet_mask ( connection_profile_h  profile,
connection_address_family_e  address_family,
char **  subnet_mask 
)

Gets the Subnet Mask.

Since :
2.3
Remarks:
You must release subnet_mask using free(). This function is supported only for IPv4 address family.
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[out]subnet_maskThe subnet mask
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Gets the network type.

Since :
2.3
Parameters:
[in]profileThe profile handle
[out]typeThe type of the profile
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed

Refreshes the profile information.

Since :
2.3
Privilege Level:
public
Privilege:
http://tizen.org/privilege/network.get
Remarks:
You should call this function in order to get the current information because the profile information can be changed.
Parameters:
[in]profileThe profile handle
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_OUT_OF_MEMORYOut of memory
CONNECTION_ERROR_PERMISSION_DENIEDPermission denied
int connection_profile_set_dns_address ( connection_profile_h  profile,
int  order,
connection_address_family_e  address_family,
const char *  dns_address 
)

Sets the DNS address.

Since :
2.3
Remarks:
The allowance of the DNS address is 2.
You must release dns_address using free().
Parameters:
[in]profileThe profile handle
[in]orderThe order of the DNS address
It starts from 1, which means first DNS address
[in]address_familyThe address family
[in]dns_addressThe DNS address
If you set this value to NULL then the existing value will be deleted
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
See also:
connection_update_profile()

Sets the DNS config type.

Since :
4.0
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]typeThe DNS config type
Returns:
0 on success, otherwise negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
int connection_profile_set_gateway_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
const char *  gateway_address 
)

Sets the Gateway address.

Since :
2.3
Remarks:
You must release gateway_address using free().
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]gateway_addressThe gateway address
If you set this value to NULL, then the existing value will be deleted
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
See also:
connection_update_profile()
int connection_profile_set_ip_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
const char *  ip_address 
)

Sets the IP address.

Since :
2.3
Remarks:
You must release ip_address using free().
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]ip_addressThe IP address
If you set this value to NULL, then the existing value will be deleted
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
See also:
connection_update_profile()

Sets the IP config type.

If you set IP config type to CONNECTION_IP_CONFIG_TYPE_STATIC, then IP address, Gateway and Subnet mask will be set to the initial value "0.0.0.0".

Since :
2.3
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]typeThe type of the IP config
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
int connection_profile_set_prefix_length ( connection_profile_h  profile,
connection_address_family_e  address_family,
int  prefix_len 
)

Sets the network prefix length.

Since :
4.0
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]prefix_lenThe network prefix length In case of IPv4, it means netmask length (also called a prefix, e.g. 8, 16, 24, 32)
Returns:
0 on success, otherwise negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
CONNECTION_ERROR_NOT_SUPPORTEDNot supported
See also:
connection_update_profile()
int connection_profile_set_proxy_address ( connection_profile_h  profile,
connection_address_family_e  address_family,
const char *  proxy_address 
)

Sets the Proxy address.

Since :
2.3
Remarks:
You must release proxy_address using free().
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]proxy_addressThe proxy address
If you set this value to NULL, then the existing value will be deleted
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
See also:
connection_update_profile()

Sets the Proxy type.

If you set the Proxy type to CONNECTION_PROXY_TYPE_AUTO or CONNECTION_PROXY_TYPE_MANUAL, then Proxy will be restored.

Since :
2.3
Parameters:
[in]profileThe profile handle
[in]typeThe type of the proxy
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
See also:
connection_update_profile()

Registers the callback that is called when the state of profile is changed.

Since :
2.3
Parameters:
[in]profileThe profile handle
[in]callbackThe callback function to be called
[in]user_dataThe user data passed to the callback function
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
Postcondition:
connection_opened_cb() is invoked when the state of profile is changed.
See also:
connection_profile_state_changed_cb()
connection_profile_unset_state_changed_cb()
int connection_profile_set_subnet_mask ( connection_profile_h  profile,
connection_address_family_e  address_family,
const char *  subnet_mask 
)

Sets the Subnet Mask.

Since :
2.3
Remarks:
You must release subnet_mask using free(). This function is supported only for IPv4 address family.
Parameters:
[in]profileThe profile handle
[in]address_familyThe address family
[in]subnet_maskThe subnet mask
If you set this value to NULL, then the existing value will be deleted
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
CONNECTION_ERROR_ADDRESS_FAMILY_NOT_SUPPORTEDNot supported address family
CONNECTION_ERROR_OPERATION_FAILEDOperation failed
See also:
connection_update_profile()

Unregisters the callback that is called when the state of profile is changed.

Since :
2.3
Parameters:
[in]profileThe profile handle
Returns:
0 on success, otherwise a negative error value
Return values:
CONNECTION_ERROR_NONESuccessful
CONNECTION_ERROR_INVALID_PARAMETERInvalid parameter
See also:
connection_profile_state_changed_cb()
connection_profile_set_state_changed_cb()