Tizen Forums

I was blocked by Spam filter...

But I have seen your progress in malinglist...

Are you sure you have no lifesign?

https://developer.tizen.org/forums/general-support/sec-s5pc210-test-bd

Check if maybe handset asks for driver...

BUT before. Be sure your battery is not empty. Check with Digital Multimeter

If you have less 2 Volt... Bootloader prevent booting...

Or you can replace battery... maybe I9300 battery should fit...

 

Good luck.

 

Best Regards

https://lists.tizen.org/pipermail/general/2013-November/002707.html """If you prepared the Sd-card, then do format the sd-card for vfat file-system. 1. You can find the u-boot-mmc.bin file at Tizen system image 2. copy the u-boot-mmc.bin file to SD-card. (When you copy, do rename from u-boot-mmc.bin to u-boot.bin) #cp u-boot-mmc.bin /media//u-boot.bin 3. After insert the Sd-card, enter the recovery mode. 4. Press dwn->up->pwr. 5. Select "recovery from external Sd-card"... 6. after recovery completed, reboot. Remember!! there must be "u-boot.bin" at SD-card.""" I have never seen success feedback? Can somebody please confirm this? To create SD card Image should not be impossible... Also to offer working Image of SD card content... For instance I am able to use WinHex to access my SD Card... To identify 512 Bytes at start as MBR with partiition table... Thanx in advance. Best Regards

In my opinion VFAT or FAT16 MBR looks identical... So Linux is not mandatory... in theory... In theory you could create this SD card easily with Windows PC or any other OS... I have only no RD-PQ for test... Best Regards