Tizen Native API  5.0
List

list_inheritance_tree.png
list.png

A list widget is a container whose children are displayed vertically or horizontally, in order, and can be selected. The list can accept only one or multiple item selections. Also has many modes of items displaying.

A list is a very simple type of list widget. For more robust lists, Genlist (Generic list) should probably be used.

This widget inherits from the Layout one, so that all the functions acting on it also work for list objects.

This widget emits the following signals, besides the ones sent from Elm_Layout:

Available styles for it are:

Default content parts of the list items that you can use are:

Default text parts of the list items that you can use are:

Supported elm_object_item common APIs.

This widget implements the elm-scrollable-interface interface, so that all (non-deprecated) functions for the base Scroller widget also work for lists.

Some calls on the list's API are marked as deprecated, as they just wrap the scrollable widgets counterpart functions. Use the ones we point you to, for each case of deprecation here, instead -- eventually the deprecated ones will be discarded (next major release).

Functions

void elm_list_horizontal_set (Elm_List *obj, Eina_Bool horizontal)
 Control horizontal mode on the list object.
Eina_Bool elm_list_horizontal_get (const Elm_List *obj)
 Control horizontal mode on the list object.
void elm_list_select_mode_set (Elm_List *obj, Elm_Object_Select_Mode mode)
 Control the list select mode.
Elm_Object_Select_Mode elm_list_select_mode_get (const Elm_List *obj)
 Control the list select mode.
void elm_list_focus_on_selection_set (Elm_List *obj, Eina_Bool enabled)
 Control focus upon items selection mode.
Eina_Bool elm_list_focus_on_selection_get (const Elm_List *obj)
 Control focus upon items selection mode.
void elm_list_multi_select_set (Elm_List *obj, Eina_Bool multi)
 Control multiple items selection on the list object.
Eina_Bool elm_list_multi_select_get (const Elm_List *obj)
 Control multiple items selection on the list object.
void elm_list_multi_select_mode_set (Elm_List *obj, Elm_Object_Multi_Select_Mode mode)
 Control the list multi select mode.
Elm_Object_Multi_Select_Mode elm_list_multi_select_mode_get (const Elm_List *obj)
 Control the list multi select mode.
void elm_list_mode_set (Elm_List *obj, Elm_List_Mode mode)
 Control which mode to use for the list object.
Elm_List_Mode elm_list_mode_get (const Elm_List *obj)
 Control which mode to use for the list object.
Elm_Widget_Item * elm_list_selected_item_get (const Elm_List *obj)
 Get the selected item.
const Eina_Listelm_list_items_get (const Elm_List *obj)
 Get a list of all the list items.
Elm_Widget_Item * elm_list_first_item_get (const Elm_List *obj)
 Get the first item in the list.
const Eina_Listelm_list_selected_items_get (const Elm_List *obj)
 Return a list of the currently selected list items.
Elm_Widget_Item * elm_list_last_item_get (const Elm_List *obj)
 Get the last item in the list.
Elm_Widget_Item * elm_list_item_insert_before (Elm_List *obj, Elm_Widget_Item *before, const char *label, Evas_Object *icon, Evas_Object *end, Evas_Smart_Cb func, const void *data)
 Insert a new item into the list object before item before.
void elm_list_go (Elm_List *obj)
 Starts the list.
Elm_Widget_Item * elm_list_item_insert_after (Elm_List *obj, Elm_Widget_Item *after, const char *label, Evas_Object *icon, Evas_Object *end, Evas_Smart_Cb func, const void *data)
 Insert a new item into the list object after item after.
Elm_Widget_Item * elm_list_at_xy_item_get (const Elm_List *obj, Evas_Coord x, Evas_Coord y, int *posret)
 Get the item that is at the x, y canvas coords.
Elm_Widget_Item * elm_list_item_append (Elm_List *obj, const char *label, Evas_Object *icon, Evas_Object *end, Evas_Smart_Cb func, const void *data)
 Append a new item to the list object.
Elm_Widget_Item * elm_list_item_prepend (Elm_List *obj, const char *label, Evas_Object *icon, Evas_Object *end, Evas_Smart_Cb func, const void *data)
 Prepend a new item to the list object.
void elm_list_clear (Elm_List *obj)
 Remove all list's items.
Elm_Widget_Item * elm_list_item_sorted_insert (Elm_List *obj, const char *label, Evas_Object *icon, Evas_Object *end, Evas_Smart_Cb func, const void *data, Eina_Compare_Cb cmp_func)
 Insert a new item into the sorted list object.
Evas_Objectelm_list_add (Evas_Object *parent)

Enumeration Type Documentation

Set list's resizing behavior, transverse axis scrolling and items cropping. See each mode's description for more details.

Note:
Default value is Elm_List_Mode::ELM_LIST_SCROLL.

Values here don't work as bitmasks -- only one can be chosen at a time.

See also elm_list_mode_set, elm_list_mode_get.

Enumerator:
ELM_LIST_COMPRESS 

The list won't set any of its size hints to inform how a possible container should resize it. Then, if it's not created as a "resize object", it might end with zeroed dimensions. The list will respect the container's geometry and, if any of its items won't fit into its transverse axis, one won't be able to scroll it in that direction.

ELM_LIST_SCROLL 

Default value. This is the same as ELM_LIST_COMPRESS, with the exception that if any of its items won't fit into its transverse axis, one will be able to scroll it in that direction.

ELM_LIST_LIMIT 

Sets a minimum size hint on the list object, so that containers may respect it (and resize itself to fit the child properly). More specifically, a minimum size hint will be set for its transverse axis, so that the largest item in that direction fits well. This is naturally bound by the list object's maximum size hints, set externally.

ELM_LIST_EXPAND 

Besides setting a minimum size on the transverse axis, just like on Elm_List_Mode::ELM_LIST_LIMIT, the list will set a minimum size on th longitudinal axis, trying to reserve space to all its children to be visible at a time. . This is naturally bound by the list object's maximum size hints, set externally.

ELM_LIST_LAST 

Indicates error if returned by elm_list_mode_get().


Function Documentation

Add a new list widget to the given parent Elementary (container) object.

Parameters:
parentThe parent object.
Returns:
a new list widget handle or NULL, on errors.

This function inserts a new list widget on the canvas.

Since :
2.3
Elm_Widget_Item* elm_list_at_xy_item_get ( const Elm_List *  obj,
Evas_Coord  x,
Evas_Coord  y,
int *  posret 
)

Get the item that is at the x, y canvas coords.

This returns the item at the given coordinates (which are canvas relative, not object-relative). If an item is at that coordinate, that item handle is returned, and if posret is not NULL, the integer pointed to is set to a value of -1, 0 or 1, depending if the coordinate is on the upper portion of that item (-1), on the middle section (0) or on the lower part (1). If NULL is returned as an item (no item found there), then posret may indicate -1 or 1 based if the coordinate is above or below all items respectively in the list.

Since :
2.3
Parameters:
[in]objThe object.
[in]xThe input x coordinate
[in]yThe input y coordinate
[out]posretThe position relative to the item returned here
Returns:
The item at the coordinates or NULL if none
void elm_list_clear ( Elm_List *  obj)

Remove all list's items.

Since :
2.3
Parameters:
[in]objThe object.
Elm_Widget_Item* elm_list_first_item_get ( const Elm_List *  obj)

Get the first item in the list.

This returns the first item in the list.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
The first item, or NULL if none
Eina_Bool elm_list_focus_on_selection_get ( const Elm_List *  obj)

Control focus upon items selection mode.

When enabled, every selection of an item inside the genlist will automatically set focus to its first focusable widget from the left. This is true of course if the selection was made by clicking an unfocusable area in an item or selecting it with a key movement. Clicking on a focusable widget inside an item will couse this particular item to get focus as usual.

Since :
3.0
Parameters:
[in]objThe object.
Returns:
The tree effect status (true = enabled, false = disabled)
void elm_list_focus_on_selection_set ( Elm_List *  obj,
Eina_Bool  enabled 
)

Control focus upon items selection mode.

When enabled, every selection of an item inside the genlist will automatically set focus to its first focusable widget from the left. This is true of course if the selection was made by clicking an unfocusable area in an item or selecting it with a key movement. Clicking on a focusable widget inside an item will couse this particular item to get focus as usual.

Since :
3.0
Parameters:
[in]objThe object.
[in]enabledThe tree effect status (true = enabled, false = disabled)
void elm_list_go ( Elm_List *  obj)

Starts the list.

Note:
Call before running show() on the list object. Warning: If not called, it won't display the list properly.
Since :
2.3
Parameters:
[in]objThe object.
Eina_Bool elm_list_horizontal_get ( const Elm_List *  obj)

Control horizontal mode on the list object.

Note:
Vertical mode is set by default.

On horizontal mode items are displayed on list from left to right, instead of from top to bottom. Also, the list will scroll horizontally. Each item will presents left icon on top and right icon, or end, at the bottom.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
true to enable horizontal or false to disable it, i.e., to enable vertical mode.
void elm_list_horizontal_set ( Elm_List *  obj,
Eina_Bool  horizontal 
)

Control horizontal mode on the list object.

Note:
Vertical mode is set by default.

On horizontal mode items are displayed on list from left to right, instead of from top to bottom. Also, the list will scroll horizontally. Each item will presents left icon on top and right icon, or end, at the bottom.

Since :
2.3
Parameters:
[in]objThe object.
[in]horizontaltrue to enable horizontal or false to disable it, i.e., to enable vertical mode.
Elm_Widget_Item* elm_list_item_append ( Elm_List *  obj,
const char *  label,
Evas_Object icon,
Evas_Object end,
Evas_Smart_Cb  func,
const void *  data 
)

Append a new item to the list object.

A new item will be created and appended to the list, i.e., will be set as last item.

Items created with this method can be deleted with elm_object_item_del().

Associated data can be properly freed when item is deleted if a callback function is set with elm_object_item_del_cb_set().

If a function is passed as argument, it will be called every time this item is selected, i.e., the user clicks over an unselected item. If always select is enabled it will call this function every time user clicks over an item (already selected or not). If such function isn't needed, just passing NULL as func is enough. The same should be done for data.

Note:
Remember that the label parameter is copied inside the list. So if an application dynamically allocated the label, the application should free the label after this call.
Since :
2.3
Parameters:
[in]objThe object.
[in]labelThe label of the list item.
[in]iconThe icon object to use for the left side of the item. An icon can be any Evas object, but usually it is an icon created with elm_icon_add().
[in]endThe icon object to use for the right side of the item. An icon can be any Evas object.
[in]funcThe function to call when the item is clicked.
[in]dataThe data to associate with the item for related callbacks.
Returns:
The created item or NULL upon failure.
Elm_Widget_Item* elm_list_item_insert_after ( Elm_List *  obj,
Elm_Widget_Item *  after,
const char *  label,
Evas_Object icon,
Evas_Object end,
Evas_Smart_Cb  func,
const void *  data 
)

Insert a new item into the list object after item after.

A new item will be created and added to the list. Its position in this list will be just after item after.

Items created with this method can be deleted with elm_object_item_del().

Associated data can be properly freed when item is deleted if a callback function is set with elm_object_item_del_cb_set().

If a function is passed as argument, it will be called every time this item is selected, i.e., the user clicks over an unselected item. If always select is enabled it will call this function every time user clicks over an item (already selected or not). If such function isn't needed, just passing NULL as func is enough. The same should be done for data.

Note:
Remember that the label parameter is copied inside the list. So if an application dynamically allocated the label, the application should free the label after this call.
Since :
2.3
Parameters:
[in]objThe object.
[in]afterThe list item to insert after.
[in]labelThe label of the list item.
[in]iconThe icon object to use for the left side of the item. An icon can be any Evas object, but usually it is an icon created with elm_icon_add().
[in]endThe icon object to use for the right side of the item. An icon can be any Evas object.
[in]funcThe function to call when the item is clicked.
[in]dataThe data to associate with the item for related callbacks.
Returns:
The created item or NULL upon failure.
Elm_Widget_Item* elm_list_item_insert_before ( Elm_List *  obj,
Elm_Widget_Item *  before,
const char *  label,
Evas_Object icon,
Evas_Object end,
Evas_Smart_Cb  func,
const void *  data 
)

Insert a new item into the list object before item before.

A new item will be created and added to the list. Its position in this list will be just before item before.

Items created with this method can be deleted with elm_object_item_del().

Associated data can be properly freed when item is deleted if a callback function is set with elm_object_item_del_cb_set().

If a function is passed as argument, it will be called every time this item is selected, i.e., the user clicks over an unselected item. If always select is enabled it will call this function every time user clicks over an item (already selected or not). If such function isn't needed, just passing NULL as func is enough. The same should be done for data.

Note:
Remember that the label parameter is copied inside the list. So if an application dynamically allocated the label, the application should free the label after this call.
Since :
2.3
Parameters:
[in]objThe object.
[in]beforeThe list item to insert before.
[in]labelThe label of the list item.
[in]iconThe icon object to use for the left side of the item. An icon can be any Evas object, but usually it is an icon created with elm_icon_add().
[in]endThe icon object to use for the right side of the item. An icon can be any Evas object.
[in]funcThe function to call when the item is clicked.
[in]dataThe data to associate with the item for related callbacks.
Returns:
The created item or NULL upon failure.
Elm_Widget_Item* elm_list_item_prepend ( Elm_List *  obj,
const char *  label,
Evas_Object icon,
Evas_Object end,
Evas_Smart_Cb  func,
const void *  data 
)

Prepend a new item to the list object.

A new item will be created and prepended to the list, i.e., will be set as first item.

Items created with this method can be deleted with elm_object_item_del().

Associated data can be properly freed when item is deleted if a callback function is set with elm_object_item_del_cb_set().

If a function is passed as argument, it will be called every time this item is selected, i.e., the user clicks over an unselected item. If always select is enabled it will call this function every time user clicks over an item (already selected or not). If such function isn't needed, just passing NULL as func is enough. The same should be done for data.

Note:
Remember that the label parameter is copied inside the list. So if an application dynamically allocated the label, the application should free the label after this call.
Since :
2.3
Parameters:
[in]objThe object.
[in]labelThe label of the list item.
[in]iconThe icon object to use for the left side of the item. An icon can be any Evas object, but usually it is an icon created with elm_icon_add().
[in]endThe icon object to use for the right side of the item. An icon can be any Evas object.
[in]funcThe function to call when the item is clicked.
[in]dataThe data to associate with the item for related callbacks.
Returns:
The created item or NULL upon failure.
Elm_Widget_Item* elm_list_item_sorted_insert ( Elm_List *  obj,
const char *  label,
Evas_Object icon,
Evas_Object end,
Evas_Smart_Cb  func,
const void *  data,
Eina_Compare_Cb  cmp_func 
)

Insert a new item into the sorted list object.

Note:
This function inserts values into a list object assuming it was sorted and the result will be sorted.

A new item will be created and added to the list. Its position in this list will be found comparing the new item with previously inserted items using function cmp_func.

Items created with this method can be deleted with elm_object_item_del().

Associated data can be properly freed when item is deleted if a callback function is set with elm_object_item_del_cb_set().

If a function is passed as argument, it will be called every time this item is selected, i.e., the user clicks over an unselected item. If always select is enabled it will call this function every time user clicks over an item (already selected or not). If such function isn't needed, just passing NULL as func is enough. The same should be done for data.

Note:
Remember that the label parameter is copied inside the list. So if an application dynamically allocated the label, the application should free the label after this call.
Since :
2.3
Parameters:
[in]objThe object.
[in]labelThe label of the list item.
[in]iconThe icon object to use for the left side of the item. An icon can be any Evas object, but usually it is an icon created with elm_icon_add().
[in]endThe icon object to use for the right side of the item. An icon can be any Evas object.
[in]funcThe function to call when the item is clicked.
[in]dataThe data to associate with the item for related callbacks.
[in]cmp_funcThe comparing function to be used to sort list items by #Elm.Widget_Item item handles. This function will receive two items and compare them, returning a non-negative integer if the second item should be place after the first, or negative value if should be placed before.
Returns:
The created item or NULL upon failure.
const Eina_List* elm_list_items_get ( const Elm_List *  obj)

Get a list of all the list items.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
A list of list items, #Elm.Widget_Item, or NULL on failure.
Elm_Widget_Item* elm_list_last_item_get ( const Elm_List *  obj)

Get the last item in the list.

This returns the last item in the list.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
The last item, or NULL if none
Elm_List_Mode elm_list_mode_get ( const Elm_List *  obj)

Control which mode to use for the list object.

Set list's resize behavior, transverse axis scroll and items cropping. See each mode's description for more details.

Note:
Default value is ELM_LIST_SCROLL.

Only one mode at a time can be set. If a previous one was set, it will be changed by the new mode after this call. Bitmasks won't work here as well.

Warning:
This function's behavior will clash with those of elm_scroller_content_min_limit(), so use either one of them, but not both.
Since :
2.3
Parameters:
[in]objThe object.
Returns:
One of Elm_List_Mode: ELM_LIST_COMPRESS, ELM_LIST_SCROLL, ELM_LIST_LIMIT or ELM_LIST_EXPAND.
void elm_list_mode_set ( Elm_List *  obj,
Elm_List_Mode  mode 
)

Control which mode to use for the list object.

Set list's resize behavior, transverse axis scroll and items cropping. See each mode's description for more details.

Note:
Default value is ELM_LIST_SCROLL.

Only one mode at a time can be set. If a previous one was set, it will be changed by the new mode after this call. Bitmasks won't work here as well.

Warning:
This function's behavior will clash with those of elm_scroller_content_min_limit(), so use either one of them, but not both.
Since :
2.3
Parameters:
[in]objThe object.
[in]modeOne of Elm_List_Mode: ELM_LIST_COMPRESS, ELM_LIST_SCROLL, ELM_LIST_LIMIT or ELM_LIST_EXPAND.
Eina_Bool elm_list_multi_select_get ( const Elm_List *  obj)

Control multiple items selection on the list object.

Disabled by default. If disabled, the user can select a single item of the list each time. Selected items are highlighted on list. If enabled, many items can be selected.

If a selected item is selected again, it will be unselected.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
true to enable multi selection or false to disable it.
Elm_Object_Multi_Select_Mode elm_list_multi_select_mode_get ( const Elm_List *  obj)

Control the list multi select mode.

  • #ELM_OBJECT_MULTI_SELECT_MODE_DEFAULT : select/unselect items whenever each item is clicked. - #ELM_OBJECT_MULTI_SELECT_MODE_WITH_CONTROL : Only one item will be selected although multi-selection is enabled, if clicked without pressing control key. This mode is only available with multi-selection.

See: elm_list_multi_select_get

Since :
3.0
Parameters:
[in]objThe object.
Returns:
The multi select mode
Since (EFL) :
1.8
void elm_list_multi_select_mode_set ( Elm_List *  obj,
Elm_Object_Multi_Select_Mode  mode 
)

Control the list multi select mode.

  • #ELM_OBJECT_MULTI_SELECT_MODE_DEFAULT : select/unselect items whenever each item is clicked. - #ELM_OBJECT_MULTI_SELECT_MODE_WITH_CONTROL : Only one item will be selected although multi-selection is enabled, if clicked without pressing control key. This mode is only available with multi-selection.

See: elm_list_multi_select_get

Since :
3.0
Parameters:
[in]objThe object.
[in]modeThe multi select mode
Since (EFL) :
1.8
void elm_list_multi_select_set ( Elm_List *  obj,
Eina_Bool  multi 
)

Control multiple items selection on the list object.

Disabled by default. If disabled, the user can select a single item of the list each time. Selected items are highlighted on list. If enabled, many items can be selected.

If a selected item is selected again, it will be unselected.

Since :
2.3
Parameters:
[in]objThe object.
[in]multitrue to enable multi selection or false to disable it.
Elm_Object_Select_Mode elm_list_select_mode_get ( const Elm_List *  obj)

Control the list select mode.

elm_list_select_mode_set() changes item select mode in the list widget. - #ELM_OBJECT_SELECT_MODE_DEFAULT : Items will only call their selection func and callback when first becoming selected. Any further clicks will do nothing, unless you set always select mode. - #ELM_OBJECT_SELECT_MODE_ALWAYS : This means that, even if selected, every click will make the selected callbacks be called. - #ELM_OBJECT_SELECT_MODE_NONE : This will turn off the ability to select items entirely and they will neither appear selected nor call selected callback functions.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
The select mode
void elm_list_select_mode_set ( Elm_List *  obj,
Elm_Object_Select_Mode  mode 
)

Control the list select mode.

elm_list_select_mode_set() changes item select mode in the list widget. - #ELM_OBJECT_SELECT_MODE_DEFAULT : Items will only call their selection func and callback when first becoming selected. Any further clicks will do nothing, unless you set always select mode. - #ELM_OBJECT_SELECT_MODE_ALWAYS : This means that, even if selected, every click will make the selected callbacks be called. - #ELM_OBJECT_SELECT_MODE_NONE : This will turn off the ability to select items entirely and they will neither appear selected nor call selected callback functions.

Since :
2.3
Parameters:
[in]objThe object.
[in]modeThe select mode
Elm_Widget_Item* elm_list_selected_item_get ( const Elm_List *  obj)

Get the selected item.

The selected item can be unselected with function elm_list_item_selected_set().

The selected item always will be highlighted on list.

Since :
2.3
Parameters:
[in]objThe object.
Returns:
The selected list item.
const Eina_List* elm_list_selected_items_get ( const Elm_List *  obj)

Return a list of the currently selected list items.

Multiple items can be selected if multi select is enabled. It can be done with elm_list_multi_select_set().

Since :
2.3
Parameters:
[in]objThe object.
Returns:
An list of list items, #Elm.Widget_Item, or NULL on failure.