Application Filtering
The Tizen platform provides a wide range of features across a variety of hardware and software components. Among the features, there are some that can be selectively supported by the Tizen device manufacturer. For application stores to correctly select your application for installation on an appropriate device, the feature and profile information must be correctly declared in your application.
Feature-based Filtering
Some features can be selectively supported by the Tizen device manufacturer. To prevent problems when the user is trying to run your application on a device that does not support all the features your application is using, do one of the following:
- When the application is running, check whether the device supports the needed features. If not, the application can use other features, which are supported by the device, as a workaround.
For example, if an application wants to use location information, it can check the device capability by using the system_info_get_*() method of the System Information API (in mobile and wearable applications). If the device supports GPS, the application uses GPS information, and if the device supports WPS only, the application uses WPS information instead of GPS.
- Use feature-based filtering to prevent your application from being shown in the application list on the Tizen Store, if the user's device does not support all the features of your application. This way you can prevent the application from being installed on an unsupportive device in the first place.
Be careful when defining the feature list for feature-based filtering. The feature list can dramatically reduce your chances of getting the application downloaded by reducing the number of devices which can support the application.
If the tizen-manifest.xml file of the application package includes a feature list, the Tizen Store compares the capabilities of the device with the required feature conditions of the application. The store only lists the applications whose conditions match the capabilities of the device, and thus prevents unsupported applications from being installed.
Figure: Feature-based filtering
When multiple features are defined in the feature list for feature-based filtering, the Tizen Store creates the filtering condition for all using the "AND" operation. For example, if there are http://tizen.org/feature/network.nfc and http://tizen.org/feature/network.bluetooth features in the feature list of the application package, only a device that has both those features can show the application on the Tizen Store application list for downloading.
Screen Size Feature
The screen size feature is the only exception to the normal feature handling process described above. When the screen size is defined in the feature list, the Tizen Store creates the filtering condition with the "OR" operation. For example, if the http://tizen.org/feature/screen.size.normal.480.800 and http://tizen.org/feature/screen.size.normal.720.1280 features are defined in your application feature list, a device that supports one or the other of those features can show the application on the Tizen Store application list.
If you do not specify a proper screen size in the tizen-manifest.xml file, your application can be rejected from the Tizen store.
The following table lists the available screen size features.
Feature key | Description | Platform version |
---|---|---|
http://tizen.org/feature/screen.size.normal | Specify this key, if the application supports all possible current and future resolutions on the normal screen size.
You cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If you do, only the most specific resolution key is considered and the less specific resolution keys are ignored. For example, if you specify both http://tizen.org/feature/screen.size.normal and http://tizen.org/feature/screen.size.normal.320.480 keys, only the http://tizen.org/feature/screen.size.normal.320.480 key is applied. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.240.400 | Specify this key, if the application supports the 240 x 400 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.320.320 | Specify this key, if the application supports the 320 x 320 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.3 |
http://tizen.org/feature/screen.size.normal.320.480 | Specify this key, if the application supports the 320 x 480 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.360.480 | Specify this key, if the application supports the 360 x 480 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.3 |
http://tizen.org/feature/screen.size.normal.480.800 | Specify this key, if the application supports the 480 x 800 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.540.960 | Specify this key, if the application supports the 540 x 960 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.600.1024 | Specify this key, if the application supports the 600 x 1024 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.720.1280 | Specify this key, if the application supports the 720 x 1280 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.normal.1080.1920 | Specify this key, if the application supports the 1080 x 1920 resolution on the normal screen size.
You can specify multiple http://tizen.org/feature/screen.size.normal.* keys, if your application supports multiple screen resolutions on the normal screen size. However, you cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
http://tizen.org/feature/screen.size.all | Specify this key, if the application supports all possible current and future screen sizes and all possible current and future resolutions per screen size.
You cannot specify keys on both screen.size.* and screen.size.normal.* levels simultaneously. If you do, only the most specific resolution key is considered and the less specific resolution keys are ignored. For example, if you specify both http://tizen.org/feature/screen.size.all and http://tizen.org/feature/screen.size.normal.320.480 keys, only the http://tizen.org/feature/screen.size.normal.320.480 key is applied. If no screen size key is declared, it is assumed that the application supports only screen.size.normal.720.1280. To avoid this, specify at least 1 screen size key. |
2.2.1 |
Feature Hierarchy
The feature keys have a hierarchy. For example, consider the http://tizen.org/feature/location, http://tizen.org/feature/location.gps, and http://tizen.org/feature/location.wps features:
- If the feature list includes the http://tizen.org/feature/location.gps feature, only a device which has the http://tizen.org/feature/location.gps feature can show the application on the Tizen Store application list.
- If the feature list includes the http://tizen.org/feature/location feature, a device which has the http://tizen.org/feature/location.gps, http://tizen.org/feature/location.wps, or http://tizen.org/feature/location feature can show the application on the Tizen Store application list.
This means that the Tizen Store considers the http://tizen.org/feature/location feature as the http://tizen.org/feature/location.gps OR http://tizen.org/feature/location.wps feature. (If the feature list includes the http://tizen.org/feature/location.gps and http://tizen.org/feature/location.wps features together, only a device which supports both those features can show the application.)
Adding the Feature List
To enable filtering for your native application, add the feature list for the application tizen-manifest.xml file:
- To open the manifest editor in the IDE, double-click the tizen-manifest.xml file in the Project Explorer view.
- In the Features tab, click Add and set the mandatory features for the application package.
The manifest file (tizen-manifest.xml) is updated automatically.
- Upload and publish the application package on the Tizen Store.
- If a Tizen-powered device requests applications, the store displays a list containing only applications compatible with the user's device.
The following tables show the available requirements for an application package. If you want to check which features are necessary for using a specific API, see the related feature in the native API Reference.
Feature key | Description | Platform version |
---|---|---|
http://tizen.org/feature/camera | Specify this key, if the application requires any kind of a camera. | 2.2.1 |
http://tizen.org/feature/camera.back | Specify this key, if the application requires a back-facing camera. | 2.2.1 |
http://tizen.org/feature/camera.back.flash | Specify this key, if the application requires a back-facing camera with a flash. | 2.2.1 |
http://tizen.org/feature/camera.front | Specify this key, if the application requires a front-facing camera. | 2.2.1 |
http://tizen.org/feature/camera.front.flash | Specify this key, if the application requires a front-facing camera with a flash. | 2.2.1 |
http://tizen.org/feature/database.encryption | Specify this key, if the application requires the database encryption feature. | 2.2.1 |
http://tizen.org/feature/fmradio | Specify this key, if the application requires an FM radio. | 2.2.1 |
http://tizen.org/feature/graphics.acceleration | Specify this key, if the application requires hardware acceleration for both 2D and 3D graphics. | 2.2.1 |
http://tizen.org/feature/input.keyboard | Specify this key, if the application requires a built-in physical keyboard. | 2.2.1 |
http://tizen.org/feature/input.keyboard.layout | Specify this key with a specific keyboard layout (string type), if the application requires a built-in physical keyboard supporting the specified keyboard layout. | 2.2.1 |
http://tizen.org/feature/led | Specify this key, if the application requires a LED. | 2.3 |
http://tizen.org/feature/location | Specify this key, if the application requires any location positioning features. | 2.2.1 |
http://tizen.org/feature/location.geofence | Specify this key, if the application requires the geofence feature. | 2.4 |
http://tizen.org/feature/location.gps | Specify this key, if the application requires the Global Positioning System (GPS) feature. | 2.2.1 |
http://tizen.org/feature/location.wps | Specify this key, if the application requires the Wi-Fi-based Positioning System (WPS) feature. | 2.2.1 |
http://tizen.org/feature/microphone | Specify this key, if the application requires a microphone. | 2.2.1 |
http://tizen.org/feature/multimedia.transcoder | Specify this key, if the application requires the multimedia transcoder feature. | 2.3 |
http://tizen.org/feature/multi_point_touch.pinch_zoom | Specify this key, if the application requires a pinch-zoom gesture feature. | 2.2.1 |
http://tizen.org/feature/multi_point_touch.point_count | Specify this key with a specific number (int type), if the application requires the minimum of specified number of simultaneous touches in a multi-point touch. | 2.2.1 |
http://tizen.org/feature/network.bluetooth | Specify this key, if the application requires the Bluetooth feature. | 2.2.1 |
http://tizen.org/feature/network.bluetooth.audio.call | Specify this key, if the application requires the Bluetooth Handsfree feature (HFP). | 2.3 |
http://tizen.org/feature/network.bluetooth.audio.media | Specify this key, if the application requires the Bluetooth Advanced Audio feature (A2DP). | 2.3 |
http://tizen.org/feature/network.bluetooth.health | Specify this key, if the application requires the Bluetooth Health feature (HDP). | 2.3 |
http://tizen.org/feature/network.bluetooth.hid | Specify this key, if the application requires the Bluetooth Human Input Device feature (HID). | 2.3 |
http://tizen.org/feature/network.bluetooth.le | Specify this key, if the application requires the Bluetooth LE feature. | 2.3 |
http://tizen.org/feature/network.bluetooth.opp | Specify this key, if the application requires the Bluetooth Object Push feature (OPP). | 2.3 |
http://tizen.org/feature/network.nfc | Specify this key, if the application requires the use of any API that, in turn, requires the Near Field Communication (NFC) feature. | 2.2.1 |
http://tizen.org/feature/network.nfc.card_emulation | Specify this key, if the application requires the NFC card emulation feature. | 2.3 |
http://tizen.org/feature/network.nfc.card_emulation.hce | Specify this key, if the application requires the NFC host-based card emulation feature. | 2.3.1 |
http://tizen.org/feature/network.nfc.p2p | Specify this key, if the application requires the NFC p2p feature. | 2.3.1 |
http://tizen.org/feature/network.nfc.reserved_push | Specify this key, if the application requires the NFC reserved push feature. | 2.2.1 |
http://tizen.org/feature/network.nfc.tag | Specify this key, if the application requires the NFC tag feature. | 2.3.1 |
http://tizen.org/feature/network.push | Specify this key, if the application requires the network-based push service. | 2.2.1 |
http://tizen.org/feature/network.secure_element | Specify this key, if the application requires the secure element feature. | 2.2.1 |
http://tizen.org/feature/network.secure_element.ese | Specify this key, if the application requires the ESE secure element feature. | 2.3 |
http://tizen.org/feature/network.secure_element.uicc | Specify this key, if the application requires the UICC secure element feature. | 2.3 |
http://tizen.org/feature/network.telephony | Specify this key, if the application requires the use of any API that, in turn, requires the telephony feature. | 2.2.1 |
http://tizen.org/feature/network.telephony.mms | Specify this key, if the application requires the MMS feature. | 2.2.1 |
http://tizen.org/feature/network.telephony.sms | Specify this key, if the application requires the SMS feature. | 2.4 |
http://tizen.org/feature/network.telephony.sms.cbs | Specify this key, if the application requires the SMS Cell Broadcast Service (CBS) feature. | 2.2.1 |
http://tizen.org/feature/network.tethering | Specify this key, if the application requires any kind of tethering feature. | 2.3 |
http://tizen.org/feature/network.tethering.bluetooth | Specify this key, if the application requires the tethering over Bluetooth feature. | 2.3 |
http://tizen.org/feature/network.tethering.usb | Specify this key, if the application requires the tethering over USB connection feature. | 2.3 |
http://tizen.org/feature/network.tethering.wifi | Specify this key, if the application requires the tethering over Wi-Fi feature. | 2.3 |
http://tizen.org/feature/network.wifi | Specify this key, if the application requires the use of any API that, in turn, requires the Wi-Fi feature. | 2.2.1 |
http://tizen.org/feature/network.wifi.direct | Specify this key, if the application requires the Wi-Fi Direct™ feature. | 2.2.1 |
http://tizen.org/feature/network.wifi.direct.display | Specify this key, if the application requires the Wi-Fi Direct™ display feature. | 2.3 |
http://tizen.org/feature/network.wifi.direct.service_discovery | Specify this key, if the application requires the Wi-Fi Direct™ service discovery feature. | 2.3 |
http://tizen.org/feature/opengles.texture_format.3dc | Specify this key, if the application requires the 3DC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.atc | Specify this key, if the application requires the ATC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.etc | Specify this key, if the application requires the ETC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.ptc | Specify this key, if the application requires the PTC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.pvrtc | Specify this key, if the application requires the PVRTC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.utc | Specify this key, if the application requires the UTC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.version.1_1 | Specify this key, if the application requires OpenGL® ES version 1.1 at minimum.
You can specify at most 1 openGL® ES version. If you specify multiple versions, only the highest one is considered. |
2.2.1 |
http://tizen.org/feature/opengles.version.2_0 | Specify this key, if the application requires OpenGL® ES version 2.0.
You can specify at most 1 openGL® ES version. If you specify multiple versions, only the highest one is considered. |
2.2.1 |
http://tizen.org/feature/opengles.version.3_0 | Specify this key, if the application requires OpenGL® ES version 3.0.
You can specify at most 1 openGL® ES version. If you specify multiple versions, only the highest one is considered. |
2.4 |
http://tizen.org/feature/platform.core.cpu.arch.armv7 | Specify this key, if the application requires the ARMv7 CPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.cpu.arch.x86 | Specify this key, if the application requires the x86 CPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.sse2 | Specify this key, if the application requires the SSE2 Floating Point Unit (FPU) architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.sse3 | Specify this key, if the application requires the SSE3 FPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.ssse3 | Specify this key, if the application requires the SSSE3 FPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.vfpv3 | Specify this key, if the application requires the VFPv3 FPU architecture. | 2.2.1 |
http://tizen.org/feature/screen.auto_rotation | Specify this key, if the application requires the automatic screen rotation feature. | 2.2.1 |
http://tizen.org/feature/screen.size.all | Specify this key, if the application supports all possible current and future screen sizes and all possible current and future resolutions per screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal | Specify this key, if the application supports all possible current and future resolutions on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.240.400 | Specify this key, if the application supports the 240 x 400 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.320.320 | Specify this key, if the application supports the 320 x 320 resolution on the normal screen size. | 2.3 |
http://tizen.org/feature/screen.size.normal.320.480 | Specify this key, if the application supports the 320 x 480 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.360.480 | Specify this key, if the application supports the 360 x 480 resolution on the normal screen size. | 2.3 |
http://tizen.org/feature/screen.size.normal.480.800 | Specify this key, if the application supports the 480 x 800 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.540.960 | Specify this key, if the application supports the 540 x 960 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.600.1024 | Specify this key, if the application supports the 600 x 1024 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.720.1280 | Specify this key, if the application supports the 720 x 1280 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.1080.1920 | Specify this key, if the application supports the 1080 x 1920 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/sensor.accelerometer | Specify this key, if the application requires an acceleration sensor. | 2.2.1 |
http://tizen.org/feature/sensor.accelerometer.wakeup | Specify this key, if the application requires the acceleration sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.activity_recognition | Specify this key, if the application requires an activity recognition sensor. | 2.3 |
http://tizen.org/feature/sensor.barometer | Specify this key, if the application requires a barometer sensor. | 2.2.1 |
http://tizen.org/feature/sensor.barometer.wakeup | Specify this key, if the application requires the barometer sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.geomagnetic_rotation_vector | Specify this key, if the application requires a geomagnetic-based rotation vector sensor. | 2.4 |
http://tizen.org/feature/sensor.gesture_recognition | Specify this key, if the application requires a gesture recognition sensor. | 2.3 |
http://tizen.org/feature/sensor.gravity | Specify this key, if the application requires a gravity sensor. | 2.3 |
http://tizen.org/feature/sensor.gyroscope | Specify this key, if the application requires a gyro sensor. | 2.2.1 |
http://tizen.org/feature/sensor.gyroscope_rotation_vector | Specify this key, if the application requires a gyroscope-based rotation vector sensor. | 2.4 |
http://tizen.org/feature/sensor.gyroscope.uncalibrated | Specify this key, if the application requires an uncalibrated gyroscope sensor. | 2.4 |
http://tizen.org/feature/sensor.gyroscope.wakeup | Specify this key, if the application requires the gyro sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.heart_rate_monitor | Specify this key, if the application requires a heart rate monitor sensor. | 2.3 |
http://tizen.org/feature/sensor.heart_rate_monitor.led_green | Specify this key, if the application requires the LED green heart rate monitor sensor. | 2.3.1 |
http://tizen.org/feature/sensor.heart_rate_monitor.led_ir | Specify this key, if the application requires the LED infrared heart rate monitor sensor. | 2.3.1 |
http://tizen.org/feature/sensor.heart_rate_monitor.led_red | Specify this key, if the application requires the LED red heart rate monitor sensor. | 2.3.1 |
http://tizen.org/feature/sensor.humidity | Specify this key, if the application requires a humidity sensor. | 2.3 |
http://tizen.org/feature/sensor.linear_acceleration | Specify this key, if the application requires a linear acceleration sensor. | 2.3 |
http://tizen.org/feature/sensor.magnetometer | Specify this key, if the application requires a magnetic sensor. | 2.2.1 |
http://tizen.org/feature/sensor.magnetometer.uncalibrated | Specify this key, if the application requires an uncalibrated geomagnetic sensor. | 2.4 |
http://tizen.org/feature/sensor.magnetometer.wakeup | Specify this key, if the application requires the magnetic sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.pedometer | Specify this key, if the application requires a pedometer sensor. | 2.3 |
http://tizen.org/feature/sensor.photometer | Specify this key, if the application requires a photometer sensor. | 2.2.1 |
http://tizen.org/feature/sensor.photometer.wakeup | Specify this key, if the application requires the photometer sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.proximity | Specify this key, if the application requires a proximity sensor. | 2.2.1 |
http://tizen.org/feature/sensor.proximity.wakeup | Specify this key, if the application requires the proximity sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.rotation_vector | Specify this key, if the application requires a rotation vector sensor. | 2.3 |
http://tizen.org/feature/sensor.temperature | Specify this key, if the application requires a temperature sensor. | 2.3 |
http://tizen.org/feature/sensor.tiltmeter | Specify this key, if the application requires a tilt sensor. | 2.2.1 |
http://tizen.org/feature/sensor.tiltmeter.wakeup | Specify this key, if the application requires the tilt sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.ultraviolet | Specify this key, if the application requires a ultraviolet sensor. | 2.3 |
http://tizen.org/feature/sensor.wrist_up | Specify this key, if the application requires a wrist up sensor. | 2.3 |
http://tizen.org/feature/shell.appwidget | Specify this key, if the application requires the AppWidget (Dynamic Box) feature. | 2.2.1 |
http://tizen.org/feature/sip.voip | Specify this key, if the application requires the Voice Over Internet Protocol (VOIP) feature. | 2.2.1 |
http://tizen.org/feature/speech.control | Specify this key, if the application requires the voice control feature. | 2.4 |
http://tizen.org/feature/speech.recognition | Specify this key, if the application requires the speech recognition (STT) feature. | 2.2.1 |
http://tizen.org/feature/speech.synthesis | Specify this key, if the application requires the speech synthesis (text to speech, TTS) feature. | 2.2.1 |
http://tizen.org/feature/usb.accessory | Specify this key, if the application requires the USB client (or accessory) feature. | 2.2.1 |
http://tizen.org/feature/usb.host | Specify this key, if the application requires the USB host feature. | 2.2.1 |
http://tizen.org/feature/vision.barcode_detection | Specify this key, if the application requires the barcode detection feature. | 2.4 |
http://tizen.org/feature/vision.barcode_generation | Specify this key, if the application requires the barcode generation feature. | 2.4 |
http://tizen.org/feature/vision.face_recognition | Specify this key, if the application requires the face recognition feature. | 2.2.1 |
http://tizen.org/feature/vision.image_recognition | Specify this key, if the application requires the image recognition feature. | 2.2.1 |
http://tizen.org/feature/vision.qrcode_generation | Specify this key, if the application requires the QR code generation feature. | 2.2.1 |
http://tizen.org/feature/vision.qrcode_recognition | Specify this key, if the application requires the QR code recognition feature. | 2.2.1 |
Feature key | Description | Platform version |
---|---|---|
http://tizen.org/feature/camera | Specify this key, if the application requires any kind of a camera. | 2.2.1 |
http://tizen.org/feature/camera.back | Specify this key, if the application requires a back-facing camera. | 2.2.1 |
http://tizen.org/feature/camera.back.flash | Specify this key, if the application requires a back-facing camera with a flash. | 2.2.1 |
http://tizen.org/feature/camera.front | Specify this key, if the application requires a front-facing camera. | 2.2.1 |
http://tizen.org/feature/camera.front.flash | Specify this key, if the application requires a front-facing camera with a flash. | 2.2.1 |
http://tizen.org/feature/database.encryption | Specify this key, if the application requires the database encryption feature. | 2.2.1 |
http://tizen.org/feature/fmradio | Specify this key, if the application requires an FM radio. | 2.2.1 |
http://tizen.org/feature/graphics.acceleration | Specify this key, if the application requires hardware acceleration for both 2D and 3D graphics. | 2.2.1 |
http://tizen.org/feature/input.keyboard | Specify this key, if the application requires a built-in physical keyboard. | 2.2.1 |
http://tizen.org/feature/input.keyboard.layout | Specify this key with a specific keyboard layout (string type), if the application requires a built-in physical keyboard supporting the specified keyboard layout. | 2.2.1 |
http://tizen.org/feature/input.rotating_bezel | Specify this key, if the application requires rotating bezel input. | 2.3.1 |
http://tizen.org/feature/led | Specify this key, if the application requires a LED. | 2.3 |
http://tizen.org/feature/location | Specify this key, if the application requires any location positioning features. | 2.2.1 |
http://tizen.org/feature/location.gps | Specify this key, if the application requires the Global Positioning System (GPS) feature. | 2.2.1 |
http://tizen.org/feature/location.wps | Specify this key, if the application requires the Wi-Fi-based Positioning System (WPS) feature. | 2.2.1 |
http://tizen.org/feature/microphone | Specify this key, if the application requires a microphone. | 2.2.1 |
http://tizen.org/feature/multimedia.transcoder | Specify this key, if the application requires the multimedia transcoder feature. | 2.3 |
http://tizen.org/feature/multi_point_touch.pinch_zoom | Specify this key, if the application requires a pinch-zoom gesture feature. | 2.2.1 |
http://tizen.org/feature/multi_point_touch.point_count | Specify this key with a specific number (int type), if the application requires the minimum of specified number of simultaneous touches in a multi-point touch. | 2.2.1 |
http://tizen.org/feature/network.bluetooth | Specify this key, if the application requires the Bluetooth feature. | 2.2.1 |
http://tizen.org/feature/network.bluetooth.audio.call | Specify this key, if the application requires the Bluetooth Handsfree feature (HFP). | 2.3 |
http://tizen.org/feature/network.bluetooth.audio.media | Specify this key, if the application requires the Bluetooth Advanced Audio feature (A2DP). | 2.3 |
http://tizen.org/feature/network.bluetooth.health | Specify this key, if the application requires the Bluetooth Health feature (HDP). | 2.3 |
http://tizen.org/feature/network.bluetooth.hid | Specify this key, if the application requires the Bluetooth Human Input Device feature (HID). | 2.3 |
http://tizen.org/feature/network.bluetooth.le | Specify this key, if the application requires the Bluetooth LE feature. | 2.3 |
http://tizen.org/feature/network.bluetooth.opp | Specify this key, if the application requires the Bluetooth Object Push feature (OPP). | 2.3 |
http://tizen.org/feature/network.internet | Specify this key, if the application requires Internet access. | 2.3.1 |
http://tizen.org/feature/network.nfc | Specify this key, if the application requires the use of any API that, in turn, requires the Near Field Communication (NFC) feature. | 2.2.1 |
http://tizen.org/feature/network.nfc.card_emulation | Specify this key, if the application requires the NFC card emulation feature. | 2.3 |
http://tizen.org/feature/network.nfc.card_emulation.hce | Specify this key, if the application requires the NFC host-based card emulation feature. | 2.3.1 |
http://tizen.org/feature/network.nfc.p2p | Specify this key, if the application requires the NFC p2p feature. | 2.3.1 |
http://tizen.org/feature/network.nfc.reserved_push | Specify this key, if the application requires the NFC reserved push feature. | 2.2.1 |
http://tizen.org/feature/network.nfc.tag | Specify this key, if the application requires the NFC tag feature. | 2.3.1 |
http://tizen.org/feature/network.push | Specify this key, if the application requires the network-based push service. | 2.2.1 |
http://tizen.org/feature/network.secure_element | Specify this key, if the application requires the secure element feature. | 2.2.1 |
http://tizen.org/feature/network.secure_element.ese | Specify this key, if the application requires the ESE secure element feature. | 2.3 |
http://tizen.org/feature/network.secure_element.uicc | Specify this key, if the application requires the UICC secure element feature. | 2.3 |
http://tizen.org/feature/network.telephony | Specify this key, if the application requires the use of any API that, in turn, requires the telephony feature. | 2.2.1 |
http://tizen.org/feature/network.telephony.mms | Specify this key, if the application requires the MMS feature. | 2.2.1 |
http://tizen.org/feature/network.telephony.sms | Specify this key, if the application requires the SMS feature. | 2.4 |
http://tizen.org/feature/network.telephony.sms.cbs | Specify this key, if the application requires the SMS Cell Broadcast Service (CBS) feature. | 2.2.1 |
http://tizen.org/feature/network.tethering | Specify this key, if the application requires any kind of tethering feature. | 2.3 |
http://tizen.org/feature/network.tethering.bluetooth | Specify this key, if the application requires the tethering over Bluetooth feature. | 2.3 |
http://tizen.org/feature/network.tethering.usb | Specify this key, if the application requires the tethering over USB connection feature. | 2.3 |
http://tizen.org/feature/network.tethering.wifi | Specify this key, if the application requires the tethering over Wi-Fi feature. | 2.3 |
http://tizen.org/feature/network.wifi | Specify this key, if the application requires the use of any API that, in turn, requires the Wi-Fi feature. | 2.2.1 |
http://tizen.org/feature/network.wifi.direct | Specify this key, if the application requires the Wi-Fi Direct™ feature. | 2.2.1 |
http://tizen.org/feature/network.wifi.direct.display | Specify this key, if the application requires the Wi-Fi Direct™ display feature. | 2.3 |
http://tizen.org/feature/network.wifi.direct.service_discovery | Specify this key, if the application requires the Wi-Fi Direct™ service discovery feature. | 2.3 |
http://tizen.org/feature/opengles.texture_format.3dc | Specify this key, if the application requires the 3DC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.atc | Specify this key, if the application requires the ATC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.etc | Specify this key, if the application requires the ETC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.ptc | Specify this key, if the application requires the PTC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.pvrtc | Specify this key, if the application requires the PVRTC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.texture_format.utc | Specify this key, if the application requires the UTC texture format for OpenGL® ES. | 2.2.1 |
http://tizen.org/feature/opengles.version.1_1 | Specify this key, if the application requires OpenGL® ES version 1.1 at minimum.
You can specify at most 1 openGL® ES version. If you specify multiple versions, only the highest one is considered. |
2.2.1 |
http://tizen.org/feature/opengles.version.2_0 | Specify this key, if the application requires OpenGL® ES version 2.0.
You can specify at most 1 openGL® ES version. If you specify multiple versions, only the highest one is considered. |
2.2.1 |
http://tizen.org/feature/opengles.version.3_0 | Specify this key, if the application requires OpenGL® ES version 3.0.
You can specify at most 1 openGL® ES version. If you specify multiple versions, only the highest one is considered. |
2.4 |
http://tizen.org/feature/platform.core.cpu.arch.armv7 | Specify this key, if the application requires the ARMv7 CPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.cpu.arch.x86 | Specify this key, if the application requires the x86 CPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.sse2 | Specify this key, if the application requires the SSE2 Floating Point Unit (FPU) architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.sse3 | Specify this key, if the application requires the SSE3 FPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.ssse3 | Specify this key, if the application requires the SSSE3 FPU architecture. | 2.2.1 |
http://tizen.org/feature/platform.core.fpu.arch.vfpv3 | Specify this key, if the application requires the VFPv3 FPU architecture. | 2.2.1 |
http://tizen.org/feature/screen.auto_rotation | Specify this key, if the application requires the automatic screen rotation feature. | 2.2.1 |
http://tizen.org/feature/screen.shape.circle | Specify this key, if the application requires a circle-shaped screen. | 2.3.1 |
http://tizen.org/feature/screen.shape.rectangle | Specify this key, if the application requires a rectangle-shaped screen. | 2.3.1 |
http://tizen.org/feature/screen.size.all | Specify this key, if the application supports all possible current and future screen sizes and all possible current and future resolutions per screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal | Specify this key, if the application supports all possible current and future resolutions on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.240.400 | Specify this key, if the application supports the 240 x 400 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.320.320 | Specify this key, if the application supports the 320 x 320 resolution on the normal screen size. | 2.3 |
http://tizen.org/feature/screen.size.normal.320.480 | Specify this key, if the application supports the 320 x 480 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.360.480 | Specify this key, if the application supports the 360 x 480 resolution on the normal screen size. | 2.3 |
http://tizen.org/feature/screen.size.normal.480.800 | Specify this key, if the application supports the 480 x 800 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.540.960 | Specify this key, if the application supports the 540 x 960 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.600.1024 | Specify this key, if the application supports the 600 x 1024 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.720.1280 | Specify this key, if the application supports the 720 x 1280 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/screen.size.normal.1080.1920 | Specify this key, if the application supports the 1080 x 1920 resolution on the normal screen size. | 2.2.1 |
http://tizen.org/feature/sensor.accelerometer | Specify this key, if the application requires an acceleration sensor. | 2.2.1 |
http://tizen.org/feature/sensor.accelerometer.wakeup | Specify this key, if the application requires the acceleration sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.activity_recognition | Specify this key, if the application requires an activity recognition sensor. | 2.3 |
http://tizen.org/feature/sensor.barometer | Specify this key, if the application requires a barometer sensor. | 2.2.1 |
http://tizen.org/feature/sensor.barometer.wakeup | Specify this key, if the application requires the barometer sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.geomagnetic_rotation_vector | Specify this key, if the application requires a geomagnetic-based rotation vector sensor. | 2.4 |
http://tizen.org/feature/sensor.gesture_recognition | Specify this key, if the application requires a gesture recognition sensor. | 2.3 |
http://tizen.org/feature/sensor.gravity | Specify this key, if the application requires a gravity sensor. | 2.3 |
http://tizen.org/feature/sensor.gyroscope | Specify this key, if the application requires a gyro sensor. | 2.2.1 |
http://tizen.org/feature/sensor.gyroscope_rotation_vector | Specify this key, if the application requires a gyroscope-based rotation vector sensor. | 2.4 |
http://tizen.org/feature/sensor.gyroscope.uncalibrated | Specify this key, if the application requires an uncalibrated gyroscope sensor. | 2.4 |
http://tizen.org/feature/sensor.gyroscope.wakeup | Specify this key, if the application requires the gyro sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.heart_rate_monitor | Specify this key, if the application requires a heart rate monitor sensor. | 2.3 |
http://tizen.org/feature/sensor.heart_rate_monitor.led_green | Specify this key, if the application requires the LED green heart rate monitor sensor. | 2.3.1 |
http://tizen.org/feature/sensor.heart_rate_monitor.led_ir | Specify this key, if the application requires the LED infrared heart rate monitor sensor. | 2.3.1 |
http://tizen.org/feature/sensor.heart_rate_monitor.led_red | Specify this key, if the application requires the LED red heart rate monitor sensor. | 2.3.1 |
http://tizen.org/feature/sensor.humidity | Specify this key, if the application requires a humidity sensor. | 2.3 |
http://tizen.org/feature/sensor.linear_acceleration | Specify this key, if the application requires a linear acceleration sensor. | 2.3 |
http://tizen.org/feature/sensor.magnetometer | Specify this key, if the application requires a magnetic sensor. | 2.2.1 |
http://tizen.org/feature/sensor.magnetometer.uncalibrated | Specify this key, if the application requires an uncalibrated geomagnetic sensor. | 2.4 |
http://tizen.org/feature/sensor.magnetometer.wakeup | Specify this key, if the application requires the magnetic sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.pedometer | Specify this key, if the application requires a pedometer sensor. | 2.3 |
http://tizen.org/feature/sensor.photometer | Specify this key, if the application requires a photometer sensor. | 2.2.1 |
http://tizen.org/feature/sensor.photometer.wakeup | Specify this key, if the application requires the photometer sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.proximity | Specify this key, if the application requires a proximity sensor. | 2.2.1 |
http://tizen.org/feature/sensor.proximity.wakeup | Specify this key, if the application requires the proximity sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.rotation_vector | Specify this key, if the application requires a rotation vector sensor. | 2.3 |
http://tizen.org/feature/sensor.temperature | Specify this key, if the application requires a temperature sensor. | 2.3 |
http://tizen.org/feature/sensor.tiltmeter | Specify this key, if the application requires a tilt sensor. | 2.2.1 |
http://tizen.org/feature/sensor.tiltmeter.wakeup | Specify this key, if the application requires the tilt sensor wake-up feature. | 2.2.1 |
http://tizen.org/feature/sensor.ultraviolet | Specify this key, if the application requires a ultraviolet sensor. | 2.3 |
http://tizen.org/feature/sensor.wrist_up | Specify this key, if the application requires a wrist up sensor. | 2.3 |
http://tizen.org/feature/shell.appwidget | Specify this key, if the application requires the AppWidget (Dynamic Box) feature. | 2.2.1 |
http://tizen.org/feature/sip.voip | Specify this key, if the application requires the Voice Over Internet Protocol (VOIP) feature. | 2.2.1 |
http://tizen.org/feature/speech.control | Specify this key, if the application requires the voice control feature. | 2.4 |
http://tizen.org/feature/speech.recognition | Specify this key, if the application requires the speech recognition (STT) feature. | 2.2.1 |
http://tizen.org/feature/speech.synthesis | Specify this key, if the application requires the speech synthesis (text to speech, TTS) feature. | 2.2.1 |
http://tizen.org/feature/usb.accessory | Specify this key, if the application requires the USB client (or accessory) feature. | 2.2.1 |
http://tizen.org/feature/usb.host | Specify this key, if the application requires the USB host feature. | 2.2.1 |
http://tizen.org/feature/vision.barcode_detection | Specify this key, if the application requires the barcode detection feature. | 2.4 |
http://tizen.org/feature/vision.barcode_generation | Specify this key, if the application requires the barcode generation feature. | 2.4 |
http://tizen.org/feature/vision.face_recognition | Specify this key, if the application requires the face recognition feature. | 2.2.1 |
http://tizen.org/feature/vision.image_recognition | Specify this key, if the application requires the image recognition feature. | 2.2.1 |
http://tizen.org/feature/vision.qrcode_generation | Specify this key, if the application requires the QR code generation feature. | 2.2.1 |
http://tizen.org/feature/vision.qrcode_recognition | Specify this key, if the application requires the QR code recognition feature. | 2.2.1 |
Profile-based Filtering
A Tizen profile describes the requirements for a category of Tizen devices that have a common application execution environment. Applications are created for a single specific target profile, such as mobile, wearable, or TV, and can run on devices compliant to that profile.
Use profile-based filtering to ensure that your application is only downloaded on the appropriate device profile. To ensure this, declare the intended profile by adding the profile name element in the tizen-manifest.xml file.
The following table lists the Tizen profiles and related profile name attributes.
Tizen profile | Profile name attribute |
---|---|
Mobile | mobile |
Wearable | wearable |
TV | TV |
In a native application, the profile name element can be added to the tizen-manifest.xml file as follows:
<manifest xmlns="http://tizen.org/ns/packages" api-version="2.3.1" ... > <profile name="mobile"/>
The Tizen Store compares the device profile and the profile name element in an application. The store only shows the applications with a profile name matching the device profile to prevent unsupported applications from being installed.